a great white driving coat and hat, part troix

I think I’m gonna need to practice my French numbers… I’ll be lucky if there are less than six or seven (or should that be sept?) posts to finish this project!

Note the all important iced coffee on the ledge... it was truly motivating!

I had a burst of energy last weekend and made some major progress on the coat… and if my luck holds, I’ll have more time to work on it tomorrow, too. It’s actually starting to look like a coat – and that’s making me want to finish it.¬† That and we have a sewing club meeting on Thursday and I REALLY want to move on to a more interesting (and authentic!) project. The photo isn’t so great and it has sort of 1960s Elvis collar feel at the moment… but I assure you it is starting to look pretty!

One of the things that had slowed me down was the simple fact that I decided to use a hong kong seam finish on all the interior seams. Partly for practice, partly for durability and aesthetics. But this meant needing lots and lots and lots of bias tape! A month or two ago I had treated myself to the bias strip cutter machine from Simplicity (no, not the official name but I don’t have the box in front of me!) and once you get it set up properly… wow, can you create miles of bias strips in minutes! In all it probably took 15-20 minutes of cutting enough strips to bind the seams. Actually applying the strips took considerably longer.

I remember this being a bigger pile… the strips were cut from some kind of synthetic satin leftover from a past project

I did find that you need to do one side of the seam at a time to get a good finish – although that may have something to do with this particularly binding fabric. In any case, it worked best to apply it to the right side of one seam, press it perfectly, then go back, finish that side and do the first step on the opposite side of the seam. Press again, then finish the second side. It was good practice… but I’m not sure I’ll use the technique for such longgggg seams again.

I was so careful with the trim... even making sure the overs & unders were symetrical for each flap.

Applying the trim was much more fun! I started with preparing the pocket flaps¬† and then lightly tracing the trim pattern onto the right side of each finished pocket flap The trim was pinned in place at each corner point of the pattern, and then I permanently secured it in place with a wide machine zig-zag stitch. This worked pretty well, even without any special trim feet for the machine. I jumped ahead and trimmed the collar… but sadly this turned out to be a mistake. It’s supposed to be trimmed after it’s sewn to coat as the trim extends down through the lapels, too. Oops!

This was when the frustration on this project started to kick in again and I began cutting more corners. I opted to sew the pocket flaps to the coat, without the welting strips or pocket pieces. It doesn’t look too bad… but I think if I start this again when I have more energy, I probably will undo the pocket flaps and the collar trim… and follow the directions properly!

But let’s see what happens in the morning, shall we?

Advertisements